SWC – Standard Work Combination. Introduction Standard Work combination (SWC) of packing which would define the standard sequence of detailed process steps with the aim of improving pack productivity. This module helps us to reduce the motions as much as possible, maximize utilization of both hands, and remove duplication steps. Features of SWC Waste movement elimination Achieve the rate target in packing Good condition of Package after packing (Spread Smiles for Customer) Standardization in process.
Redmi Note 1 Camera Scan UN3481 NT13 label T13 Scan thc tJN3481 Baden label put 't b the problem Menu (p) and Choose scan label 3481 Try scanning a UN3481 Battery Label scan spoo label.
SWC for NT box. Remove P-Slip with Left hand from zebra printer.
Pü703. SWC for NT box. Fold the right flapper with right hand.
11" /FI!/I. eotnd ama40n.l. ama40n.in. SWC for NT box.
amazon prime amazon.in/prime. SWC for NT box. Hold the package from left hand and start taping box from other hand (make sure half tape is on the box and half on the flapper for proper seal).
SWC for NT box. Pull the tape as per the requirement of box from right hand.
SWC for NT box. Perform the finishing job if required.
SWC for NT box. Paste the UN3481 from right hand.
SWC for NT box. Paste the sp00 from right hand. Check on the screen “Shipment Completed”.
SWC for NP box. Introduction NP: NP stands for No. of Polybags. There are various NP at pack station..
SHADES' STUFF WATCHES Analogue Gold Dial Men's watch (Wd Gold Strap) Singles 314 NP5.
lili ug•uoieue. amazon.in. d ozeLue. SWC for NP box.
SWC for NP box. Remove the silver strip from right hand.
v OOZ. uruoze—-.--N. SWC for NP box. Fold both the ends and close the seal of package.
SWC for NP box. Scan the sp00 label from right hand.
•t,ozezue. SWC for NP box. Place the package on conveyor from right hand.
SWC for NM box. Introduction NM: NM stands for No. of Mailer. There are various NM at pack station..
uruc#ewe. With Raw Fitbit vet.a 2 king. One Site (S L Bands (BlaO/Carbon) NMI scan spoo label 313 REDMI 9.
SWC for NM box. Remove P-Slip from zebra printer with left hand.
SWC for NM box. Remove the silver strip from right hand.
SWC for NM box. Hold both the end with both the hands and close the seal of the package.
SWC for NM box. Scan the sp00 label from right hand.
SWC for NM box. Place the package on conveyor from right hand.
SWC for NC box. Introduction NC: NC stands for No. of Corrugate. There are various NC at pack station..
SWC for NC box. Take out the correct box from left hand.
SWC for NC box. Fold other flapper inside with both hands.
SWC for NC box. Keep the box on the station. Put Asin /item inside the box.
SWC for NC box. Remove P-Slip with Left hand from zebra printer.
SWC for NC box. Fill the dunnage as per the requirement.
SWC for NC box. Close the last flapper with both the hands.
SWC for NC box. Hold the box from left hand and start tapping from right hand.
SWC for NC box. Continue tapping on the other side of the box.
SWC for NC box. Paste hazmat label on the package from right hand and do the finishing job.
SWC for NC box. Check on the screen for “Shipment Complete” and place the package on conveyor.
SWC for BS box. Introduction NC: NC stands for Bombay Sort. There are various BS at pack station, Few examples are below.
SWC for BS box. Take out the correct box from right hand.
SWC for BS box. Hold the box from left hand and start tapping box from right hand.
SWC for BS box. Rotate the box upside down and keep on the station.
SWC for BS box. Take the item from right hand and take the p-slip from left hand and put it together inside the box.
SWC for BS box. Take the dunnage from righ hand as per the requirement of empty space in box.
SWC for BS box. Close both righ t and left flapper with the help of both the hands.
SWC for BS box. Scan the spoo label from the same hand.
SWC for BS box. Paste the spoo on the box fro right hand.
SWC for BS box. Check on the screen for “Shipment Complete” and place the package on conveyor.