Welcome to Imerys Nadiad Plant

Welcome to Imerys Nadiad Plant. In the interest of safety and for safety of others, we would like to introduce a few slides.

Imerys EHS Charter. Key Message from Imerys CEO Everyone is responsible for Health and Safety and must actively contribute. Proactively identify and report incidents, unsafe conditions or behaviors. Zero tolerance for Series 7 critical standards breached. Look for opportunities to reduce risk exposure. Perform Take 5 before visiting the Plant. Lead by Example. Respect Health and Safety Standards. Our Objective Understand all specific hazards and risks associated with this operation, and Have a safe and fruitful visit. Your attention for the next few minutes is very important!.

Map of Production Plant. Below list must be indicated in the Site Map including Signs that you could use:.

Notification. When you arrive, please fill the visitor registration book. Make sure to sign It when you leave. If you do not, we will not know you are here for security and emergency purposes..

PPE Requirements. Basic Personal Protective Equipment (PPEs) Specific Personal Protective Equipment (PPEs) depending on Location Needs.

Emergency. KEY PENDING ACTION Emergency Alarms come as a Continuous Siren, when you hear such a siren please follow instructions from your guide. Check with your Imerys Guide and remain calm. Evacuate to the Muster Point when instructed by your Guide. Leave by the nearest exit, do not run or collect your personal belongings. Do not re-enter the building until instructed by your Guide. If you observes an emergency situation, Notify your Imerys Guide, in his or her absence, or the Site or EHS Manager. Do not attempt to perform rescue in any form unless you have been formally trained. Do not attempt to extinguish a fire unless you have been formally trained..

Potential Hazards in the Plant. Parking: Bike, Cars, trucks.

Today’s Safety Tips. Key hazardous activities in site will be informed by site manager or safety officer, if any..

Risk Assessment – Take 5. Assess the risk of your Visit You are ready to go out to the Production floor and before doing that, we would like for you to take a quick minute to Assess the risk Think through the visit on what you will be doing; Look for potential exposure on where you will be visiting; Assess what could happen if things get out of control; Take the necessary precaution and keep them in mind; and Do your visit by watching out for changing conditions. THINK – LOOK – ASSESS – TAKE – DO.

Your Valuable Feedback. Key Hazardous Activities Today Unsafe Conditions / Behaviors The identification and immediate correction of all unsafe conditions and behaviors can help prevent an accident. We encourage all our Visitors to report to us any unsafe conditions, unsafe behaviors, near misses and environmental incidents (e.g. spills, leaks and emission) to your Guide without hesitation. We DO NOT apportion blame and our objectives is Zero Injury and Zero Environmental Harm . Best Practice Sharing & Continuous Improvement We appreciate all feedbacks, especially Best Practice Sharing, for our Continuous Improvement..

Acknowledgement. trianglattention. Now that you have completed our Visitors’ Safety Induction, kindly acknowledge by signing-off the attendance sheet that you understood and are committed to adhere to all our Health and Safety Requirements as a Visitor to our Plant. Thank You..

Please contribute actively in keeping each other safe!.