Reference AFMAN24-604, Attachment 17. Enter the address and number of where the HAZMAT was certified. 

Scene 1

SHIPPER'S DECLARATION FOR DANGEROUS
Consignee
IATA
TRANSPORT DETAILS
Tris imitations
Airport Of Departure (optional):
Air Waybill NO
page Of pages
Shippers Reference No.
WARNING
Failure to compty in respects Wth the
Goods Regulations may be in Weach Of
applicable Subject to
(deete non-apphcab'e)
NONRADIOACTIVE
O.tty n d of Pac"ng
Airport of Destination (optional):
NATURE AND QUANTITY OF DANGEROUS GCX)DS
Dangerous Goods Identification
Additimal Handing Inf«metim
hereby declare that the cmtents Of this c«signrnent fully and
described by the shipping name. and are classified, packaged
marked and labeled/p:aearded, and ere in re»ects in proper condit&
to applicable internatimal and national gwernmental
I declare that Of the applicable trensWt requirements have
been
of
mhg

Shipment type: Radioactive or Non-radioactive

Enter 3-digit POD and/ or in-the-clear geographical location of the airport of destination

Enter 3-digit POE and/ or in-the-clear geographical location of the airport of departure

Passenger eligibility code will be entered here per AFMAN24-604 (either passenger and cargo aircraft eligible or cargo aircraft only)

Enter the page number and total number of pages here

This key is not entered by shipper, it may be left blank

Enter 6-digit DODAAC and/or the in-the-clear geographical location of ultimate consignee

Enter the address and number of where the HAZMAT was certified

Enter UN, NA, or ID number. Enter the PSN. Enter hazard class, division, and compatibility group as well as subsidiary if applicable. 

Scene 2

Table

Description automatically generated with medium confidence

Enter hazard class, division, and compatibility group as well as subsidiary if applicable

Enter net quantity of hazard as well as type and number of packaging

Enter the packing instruction used to prepare the material for shipment

Enter 24- hour emergency response numbers as well as any additional accessorial hazard items with multiple hazards (if applicable)

Enter name of official signing the form, the date material was certified and signature of official certifying the shipment

Example of completed SDDG/ HAZDEC. Leave blank for inspector's stamp. 

Scene 3

Table

Description automatically generated

Enter what the shipment is (optional). Enter ‘Constant Surveillance and Custody Service (CIS)’. 

Scene 4

Enter 3-digit in-the-clear destination code or DODAAC

Enter ‘Constant Surveillance and Custody Service (CIS)’

Enter ‘DOD 4500.9R Part II, Chapter 205, paragraph I.2’

Enter typed name, digital or physical signature and date

Enter net quantity per package (for single or multi piece shipments)

A DD Form 1387-2, Special Handling/Certification, is required for any shipment moving via military airlift that is classified or requires additional special handling (e.g., Protect from Freezing).. 

Scene 5

A DD Form 1387-2, Special Handling/Certification, is required for any shipment moving via military airlift that is classified or requires additional special handling (e.g., Protect from Freezing).

Refer to the DTR Part II, Chapter 205, Figures 205-3 through 205-9, for the DD Form 1387-2 and guidance on its completion.

Requirements for an Air Transportability and Test Loading Activity (ATTLA) letter:. 

Scene 6

Requirements for an Air Transportability and Test Loading Activity (ATTLA) letter:

Length:  20 feet  (commonly palletized outsized cargo [e.g., pipes, wood,  Helo  blades, and light oversized cargo] does not require ATTLA)

Freight containers (e.g., ISO containers, ISU, QUADCON, or TRICON) palletized on single 463L pallets that are over 10,000  lbs

Any item that requires special equipment or procedures for loading

Items that have inadequate ramp clearance for ramp inclines of 15 degrees

Axle loads:  5,000 lbs. (vehicle with pneumatic tires)

Enclosed items (e.g., airtight containers and on-board tanks) not designed with pressure relief devices or items that cannot be configured in a way to allow for aircraft cabin pressure changes

A picture containing indoor Description automatically generated

Floor contact pressure:  50 pounds per square inch

Wheel loads:  2,500 lbs. (vehicle with pneumatic tires)

Load concentration: 1,600 lbs. per linear foot

Look up applicable ATTLA via the ATTLA Sharepoint : https://intelshare.intelink.gov/sites/attla/. 

Scene 7

Look up applicable ATTLA via the ATTLA  Sharepoint : https://intelshare.intelink.gov/sites/attla/

E-mail:  ATTLA@us.af.mil DSN: (312) 785-2330 or Commercial: (937) 255-2330

Graphical user interface, text, application

Description automatically generated

Item name/ model number. Item description, including weights and dimensions. 

Scene 8

Text

Description automatically generated

Item description, including weights and dimensions

Gross vehicle weight and axle weight limits. Item preparation for different aircraft. 

Scene 9

Gross vehicle weight and axle weight limits

Loading instructions to include shoring required from shipper

Shoring required to be provided by shipper. Shipper will provide a copy of the ATTLA in the shipping documents. 

Scene 10

Text, letter

Description automatically generated

Shoring required to be provided by shipper

Shipper will provide a copy of the ATTLA in the shipping documents

TCN. Consignor DODAAC/ In the clear address. Qr code Description automatically generated. 

Scene 11

Qr code

Description automatically generated

3 digit RDD (left blank for classified unit move)

Transportation priority- TP 1,2,3, or 4 (left blank for unit move)

3 digit POD (left blank for classified unit move)

3 characters- extracted from supply/shipping documents

Code 39 bar code and ultimate consignee address

TCN. TAC (transportation account code). Table Description automatically generated. 

Scene 12

Manual Military Shipping Label (DD Form 1387)

1 digit (TP 1,2,3, or 4) Left blank for unit move

Extracted from supply/shipping documents or blank

This form will be used only for DoD contingency operations where manual entry is the only means available to document DTS shipments

Air Manifest. Table Description automatically generated. 

Scene 13

Provided by Load Planning (will need to provide a copy for the Joint Inspection package)

Graphical user interface Description automatically generated with medium confidence. 

Scene 14

Graphical user interface

Description automatically generated with medium confidence

Packing List (DD Form 1750). This form is optional, but provides an itemized list of what the unit is moving. 

Scene 15

This form is optional, but provides an itemized list of what the unit is moving

Formula: (D1 x W1) + (D2 x W2) Gross weight. Step 1. Weigh all axles individually. Step 2. Mark weight above each individual axle. Step 3. Establish the RDL at the forward edge of the vehicle. Step 4. Measure all distances from RDL to center of each individual axle. Step 5. Distance multiplied by weight equals a moment.. 

Scene 16

Formula:  (D1 x W1) + (D2 x W2)                           Gross weight

Step 1.  Weigh all axles individually.  Step 2.  Mark weight above each individual axle.  Step 3.  Establish the RDL at the forward edge of the vehicle.  Step 4.  Measure all distances from RDL to center of each individual axle.  Step 5.  Distance multiplied by weight equals a moment.

Diagram, engineering drawing Description automatically generated. 

Scene 17

Diagram, engineering drawing

Description automatically generated

Diagram

Description automatically generated

PowerPoint Presentation

 Look up applicable ATTLA via the ATTLA  Sharepoint : https://intelshare.intelink.gov/sites/attla/

PowerPoint Presentation

Scene 1 (0s)

Scene 2 (53s)

Scene 3 (1m 21s)

Scene 4 (1m 30s)

Scene 5 (2m 7s)

Scene 6 (2m 27s)

Scene 7 (3m 54s)

Scene 8 (4m 16s)

Scene 9 (4m 25s)

Scene 10 (4m 36s)

Scene 11 (4m 46s)

Scene 12 (5m 35s)

Scene 13 (6m 39s)

Scene 14 (6m 48s)

Scene 15 (6m 59s)

Scene 16 (7m 9s)

Scene 17 (7m 51s)